How To Flash / Install Firmware Acer Liquid E2.

How To Flash / Install Firmware Acer Liquid E2.


Flash / Install Firmware Acer Liquid E2. Guidebelajar on this guide will explain to you how to flashing android device on Acer Liquid E2 with an easy and simple stepFlashing in android is the same way like a fresh install on the windows PC, So by performing a flash on Android, you will give a new performance like a new phone. One reason that you should perform a flash your android is because your Android gets bootloop or when you failed to install Stock ROM Mod. 


Do you know what is bootloop, Ok? now I will explain to you what is boot loop. Some people say that bootloop is a problem that occurred on an android system which the android system could not start up going to the home screen menu. And it's happened is automatically return to the initial state on the first time when you turn on the Acer Liquid E2And the device will stop to display on the smartphone logo.
Flash / Install Firmware Acer Liquid E2.
Flash / Install Firmware Acer Liquid E2.

So, If you have any problems on Acer Liquid E2 boot loop or accidental Acer Liquid Z160 or liquid E2 is not installed recovery. In this guide, I'm offering recovery TWRP or Cwm. CMW is a recovery that already in recovery mode for customization of the device such that the Acer Liquid E2 or Z160 with a variety of additional functions in it such as backup/restore, installations and others that are not contained in the standard recovery mode. Generally, in case of a default recovery bootloop, Acer Liquid E2 will go missing in case of boot loop. whereas the original recovery cannot help when there hard brick.

Now, follow the instruction list below, do it at your own risk.

Prepare Flash Acer Liquid E2.

  1. Latest SP Flash tool: Here

  2. Driver Acer liquid E2: Here or this Link 

  3. Scatter Acer Z160: Here
  4. Recovery Twrp / Recovery CWM for Acer E2 Here
  5. To ensure what is firmware used by your device, you can check by going to Setting ->About -> Software Information ->Build Number.

Flashing Acer Liquid E2.

  1. At the first time, please Install driver for Acer Liquid E2 that already downloaded before. Then remove your back case, battery, sim card and SD Card  if installed
  2. Then, Connect your Acer liquid E2 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
  3. Then, release USB data cable from the PC.
  4. Open SP flash tool software and click scatter load. find Acer E2 scatter storage location earlier.
  5. Then, On the file recovery, you should give a checklist. click recovery and select the desired recovery. whether to use TWRP or CWM.
  6. Then, click download
  7. Next step is to plug your Acer Liquid E2 to your PC (without battery, SIM Card, or SD Card)
  8. Wait for the process until finished
  9. Next, Disconnect your Acer Liquid E2 from your PC.
  10. Enter Recovery Mode by Press Power Button + Volume UP. select Recovery.
  11. Finally, install Stockrom or original firmware (you can find a link at the end of this post)
  12. Reboot your phone
  13. Success.

Download Firmware Acer Liquid E2. Here


0 Response to "How To Flash / Install Firmware Acer Liquid E2."

Post a Comment

ID: Silahkan berkomentar dengan cara yang sopan, kami menghargai setiap saran dan masukan demi kenyamanan bersama.

EN: Please comment in a polite manner, we appreciate any suggestions and inputs for the sake of mutual convenience.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel