Flash LG K10 (2017) to Unbrick Using LG Flashtool KDZ Method

Flash LG K10 (2017) to Unbrick Using LG Flashtool KDZ Method.

Flash LG K10 (2017). This is a step by step guide how to flash stock firmware on LG K10 2017. By flashing the stock firmware into the LG device, you can fix your phone from a bootloop or brick. There are several possibilities that cause your LG phone to become a boot loop. For example, you have flashed a custom ROM to the latest version before the manufacturer release it. The current custom ROM will bring many bugs that can cause the Android operating system malfunction. so in the end, your phone becomes brick. The only way to overcome this is flash stock firmware to restore to its original state. And now, guidebelajar offer a full LG K10 (2017) firmware with the step by step flashing guide.

Before this guide go further, Now we will show LG K10 (2017) specifications. This phone has several versions, LG X400 and LG M250N. This device released 2017, February. Comes with 5.3 inches IPS LCD capacitive touchscreen, 16M colors. Powered by Octa-core 1.5 GHz Cortex-A53, MediaTek MT6750 chipset, and Mali-T860MP2 GPU. ALso supported with 2 GB of RAM. LG K10 2017 has 13 MP on primary camera and 5 MP on secondary camera. This phone runs on Android 7.0 (Nougat).

If you are ready, let us proceed with the stock installation step.


  1. This guide can only be applied to LG K10 (2017), make sure your device is as required, to avoid fatal damage.
  2. Before proceeding, make sure your battery fully charged. to avoid the Android system shutdown because it runs out of battery.
  3. Make sure no Antivirus run on your computer or PC to avoid the LG flash tool 2014 blocked.
  4. If LG driver is not already installed, please download and install via this link. Here
  5. Then, we need LG Flashtool 2014 to help flash a stock firmware to the phone. You can download LG flash tool 2014 via this link. Here
  6. Finally, you need to download The LG K10 2017 firmware or Stock ROM. We offer two methods how to download it.
    • first, you need to copy your device's IMEI number, and then the internet browser (Google Chrome, etc). For instruction how to download LG firmware with IMEI number, you can follow this link. 
    • https://goo.gl/LoA4Dt
  7. Second, You can go to the available link below to download the LG K10 2017 stock firmware.
    • LG X400 - Here 
    • https://goo.gl/cjBKYy
    • LG M250N - Here 
    • https://goo.gl/3v7Pky
As the alternative methods, you can flash your LG K10 (2017) with LG UP and Uppercut, Use this guide.

Flashing Guide.

  1. The full backup is required before you flash stock firmware the LG K10 2017. You can use this guide how to backup your data on Android phone. Here
  2. Make sure all required files above already installed on the computer. (LG flash tool and LG driver)
  3. Copy or move LG K10 (2017) stock firmware in the same folder as LG Flashtool folder.
  4. Then, launch LG Flash tool 2014 as administrator. You can do it by following this step.
    • Go to LG flashtool2014.exe
    • Right-click with your mouse
    • Select/click run as Administrator.
  5. If LG flashtool2014 can't open, you may need to install Visual C ++ Runtime Library. Download Here and then try the previous step again.
  6. Once the LG flash tool 2014 already open, you will see the window shown in the picture below. For the next step please follow according to the number shown in the picture.
  7. flash LG K10
    flash LG K10
    • 1: Select type, you can choose CDMA or 3GQCT
    • 2: from the Phone mode drop-down menu, select DIAG.
    • 3: You can click the folder icon to load KDZ firmware into LG flash tool at the select KDZ file.
    • 4: Select Normal flash or CSE Flash.
      • Normal flash, it will Flash stock firmware without losing any data.
      • CSE flash if you want upgrading, downgrading, boot looping, or just need to go back to original fresh stock. this task will delete everything stored in phone internal memory.

  8. If you select the normal flash button, then you will open read phone information windows. Now click the start button.
  9. It will open the Select country and language window. Don't check smartphone upgrade.

  10. flash LG K10
    flash LG K10

  11. Go to your phone, and then Power Off the LG K10 (2017) by press and hold the power button.
  12. Once the LG K10 (2017) completely power off, now connect it to the computer via USB cable while pressing down the Volume Up button.
  13. Once the LG K10 (2017) is connected and recognized by the computer, it should show Download Mode with “Firmware Update” written on top of the phone screen.
  14. Then, back to Select country and language window and click OK button.
  15. Now, LG flash tool 2014 will automatically launch LG Mobile Support Tool window on a computer screen.
  16. At this step you can wait for the status bar to reach 100%, this means the flashing process has been successful.
  17. Now, your phone should reboot automatically.
  18. Then, you can be saved disconnect your phone from the computer.
  19. Good luck.

0 Response to "Flash LG K10 (2017) to Unbrick Using LG Flashtool KDZ Method"

Post a Comment

ID: Silahkan berkomentar dengan cara yang sopan, kami menghargai setiap saran dan masukan demi kenyamanan bersama.

EN: Please comment in a polite manner, we appreciate any suggestions and inputs for the sake of mutual convenience.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel